Drywall Services in Umatilla, FL

Mount Dora Drywall Pros provides home drywall installation and repair across Umatilla, the small Lake County city known as the Gateway to the Ocala National Forest. Founded by settlers who arrived in the mid-1800s and shaped for decades by the citrus packing industry, Umatilla today is a mix of longtime home streets near downtown, rural acreage properties, and homes drawn to the area's proximity to hundreds of thousands of acres of forest and springs.

Umatilla owners can request a quote for a repair, a renovation, or an installation, and every job comes with a clear, itemized quote before work begins, with scope, materials, and timeline stated plainly — the straightforward approach this town expects.

Get a FREE Quote.

📞 Talk to a Drywall Specialist: (352) 623-5928

Frequently Asked Questions

How much does drywall repair cost?

Small patches start at the $250 minimum, and the repair floor runs $250 to $375. Typical single repairs run $250 to $800, and a ceiling repair falls in that same $250 to $800 range. New board, hung and finished, runs $1.45 to $2.60 per square foot at Level 3, $1.60 to $3.00 at Level 4, and $1.85 to $3.40 at Level 5. We look at the job and give you a firm price in writing before we start.

How long does a drywall job take?

A patch takes a few hours to one day. A room takes 1 to 2 days. A full home takes 3 to 5 days. Compound must dry between coats. Most jobs span more than one visit.

Can you match my wall texture?

Yes. We match orange peel, knockdown, and smooth finishes. We test the match on a small spot first. On most walls, the repair blends in once it is painted.

Do you fix water-damaged drywall?

Yes. First the leak must be fixed and the wall must be dry. Then we cut out the soft board, check for mold, and fit new board. Wet board that stays in place will keep causing harm.

Will the work make a mess?

We mask floors and vents. We use dust control when we sand. We haul out the old board and scraps. Your home should be clean when we leave.

Do you paint after the repair?

We leave repairs sanded and ready for paint, and if you want the spot painted to match, ask when you book. Many owners paint the full wall for the best match.

What Does My Drywall Project Cost?

Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Mount Dora, and a calculator built on the same numbers.

Drywall Repair & Patch

Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Mount Dora — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a cut-out ceiling section replaced and texture-matched (an 8×10 section ran $720 flat), long seam cracks (46 linear feet of re-taped seams across three rooms ran $540 flat), and popcorn removal finished smooth (230 sq ft ran $575 flat).

New Drywall Installation

For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.00 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,670 around Mount Dora.

Room Remodel & Replacement

Tearing out old drywall and hauling it off adds $0.60–$1.25 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,330. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.

Garage Drywall

Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.

Texture, Skim & Paint

On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.85. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,960 for texture and paint together.

What Moves the Price

  • Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
  • Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
  • Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
  • Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
  • Tear-out. Removing old drywall and disposing of it is its own line on the quote.
  • Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.

Estimate Your Project

1 · Pick your project
Your estimated range

Free — no obligation. Your calculator numbers ride along with the request.

Residential Drywall Contractors Who Know Umatilla

Mount Dora Drywall Pros has worked across Umatilla's mix of housing, from older homes near the historic downtown to newer home properties and acreage lots on the edge of town near the Ocala National Forest. That range means the crew is comfortable adjusting its approach based on the age and layout of a home rather than applying the same process to every job.

Every Umatilla estimate is written and itemized before work begins, with direct communication about materials and timeline across the project. Mount Dora Drywall Pros stands behind its installation and finish quality across Umatilla, on single repaired walls and full interiors alike.

Hands applying tape along corner bead in Umatilla

About Umatilla: Gateway to the Ocala National Forest

Umatilla was founded in 1856 by Nathan J. Trowell and his family, who settled near what is now downtown, and the town was later named after Umatilla, Oregon, at the request of a resident who admired the sound of the name. Incorporated in 1904, the city grew alongside the citrus industry that dominated Lake County for much of the twentieth century, with a large citrus packing plant on State Road 19 becoming one of Umatilla's largest employers before severe freezes in the 1980s pushed much of Florida's citrus production further south.

Today Umatilla is best known as the Gateway to the Ocala National Forest, a nearly 400,000-acre forest that begins just north of the city and draws visitors for its first-magnitude springs, lakes, and hiking trails. The historic Paul Bryan Schoolhouse downtown, once the town's early school building, now serves as the headquarters of the Umatilla Historical Society, preserving the city's roots as a citrus and farming community even as it has grown into a home area for people drawn to its access to outdoor recreation.

Property Considerations for Umatilla's Residential Properties

Homes near Umatilla's historic downtown tend to be older, with some dating back to the early twentieth century citrus-boom years, and these properties can have wall assemblies with prior repairs or non-standard framing that are worth checking before a new drywall project begins. Detached single-family homes make up much of this part of the city, often on established, tree-lined streets.

Properties further from downtown, including acreage lots and homes near the edge of the Ocala National Forest, tend to be more spread out, with longer driveways and, in some cases, outbuildings or additions that were built over time. These rural-style properties call for a bit more planning around material access than a standard in-town lot. Mount Dora Drywall Pros reviews each property's layout and construction before finalizing a quote.

Local Knowledge for Umatilla Homeowners

Umatilla's identity as a small, forest-adjacent city means many homeowners here value a straightforward, no-pressure approach to home repairs, and Mount Dora Drywall Pros keeps communication direct from the first phone call through the final walkthrough. Property owners planning a renovation around an older home near downtown often want a finish that matches the existing wall texture rather than a stark contrast between old and new work, and that expectation is discussed as part of the estimate.

For homes on acreage or near the forest boundary, seasonal humidity and the occasional wildlife or pest consideration common to rural Florida properties can factor into how a wall cavity is treated once it's opened, and the crew addresses those situations as they come up rather than guessing in advance. Getting a clear picture of the property before pricing the job helps avoid surprises once work is underway. We also serve homeowners just south of town in Eustis.

How We Work

Step 1 — Initial Conversation and Site Details

A Umatilla job starts with a conversation about the property and the scope of the drywall work, including any specific concerns, such as an older citrus-boom wall assembly near the historic downtown or a moisture-prone area.

Step 2 — On-Site Assessment or Photo Review

Depending on the project, the crew reviews the space in person or through photos and measurements provided by the property owner, checking the framing and the non-standard assemblies older Umatilla homes can hide.

Step 3 — Written Quote

A clear, itemized quote is provided covering materials, labor, and an estimated timeline for your Umatilla project, so you know what to expect before committing to the work.

Step 4 — Scheduling

Once the quote is approved, the job is scheduled around the property owner's timeline, with consideration given to occupied spaces, active businesses, and ongoing renovation work at the same location.

Step 5 — Installation or Repair

At the property, the crew hangs the board, tapes and muds the joints, and sands to a paint-ready finish, guarding fixtures, trim, and neighboring finished areas throughout.

Step 6 — Final Walkthrough

A Umatilla job closes with the finished work reviewed beside you, expectations confirmed, and the space left clean and ready for the next step, such as painting.

Ready to Start Your Drywall Project?

Request a quote or check availability for an upcoming drywall installation or repair project in Umatilla — clear, itemized estimates, straightforward scheduling for home and commercial properties, and no pressure or guesswork about scope or cost before the work begins.

What we see most in Umatilla

In Umatilla, near the lakes and roads of Lake County, the calls we get most are leak stains, cracked seams, and dated popcorn ceilings. Each of those problems has a clear fix, quoted in writing before we start.

Projects completed in Umatilla

Drywall finishing in Umatilla, FL

Homeowner: Stan — Umatilla, FL

The problem: Stan's Umatilla project had 500 square feet of board hung and waiting — seams open, corners bare, and no finish on any of it.

What Stan told us: Stan wanted the finishing done in full: taped seams, beaded corners, and three coats sanded smooth for paint.

Scope of work: The crew taped every seam in paper tape, set corner bead throughout, and applied three coats of compound over the 500 square feet, sanding as they went.

Materials and gear: Paper tape and corner bead, with joint compound worked in three coats.

Final price: $1,450 for the finishing.

Cost note: Stan's finishing price is $2.90 per square foot, inside the Level 4 install band of $1.60 to $3.00 per square foot.

Outcome: Stan's board is now a finished, paint-ready surface with clean corners throughout.

📞 (352) 623-5928