Commercial drywall runs on a different clock than home work. A retail fit-out has a lease start date. A medical suite has an inspection sequence. An office refresh usually has staff still working two doors down.
Mount Dora Drywall Pros installs drywall in commercial buildings across Mount Dora and Lake County, including tenant improvements, shell build-outs, offices, clinics, restaurants, warehouses, and multi-unit properties. The board itself is often the least complicated part.
What determines whether a job goes smoothly is how well the crew reads a set of construction documents, coordinates with the other trades in the building, and understands which walls are rated assemblies that cannot be improvised on site.
Commercial Drywall Installation FAQs in Mount Dora
Can you work outside of normal business hours so our building stays open?
Yes, and on occupied commercial properties it is often the only workable option. We regularly run evening and weekend schedules where trading hours, patient appointments, or neighboring tenancies make daytime work impractical. It needs to be agreed at quoting stage rather than mid-job, because after-hours access has to be arranged with the property manager and it affects both crew scheduling and price. Tell us your operating hours early and we will build the program around them.
Do you install fire-rated and sound-rated wall assemblies to specification?
We do, and we build them to the listed assembly rather than approximating it. That means the specified board type, layering, correct fastener spacing, insulation where the assembly requires it, acoustic sealant at the perimeter, and proper firestopping at every penetration. Substituting materials or changing the build-up compromises the rating and will fail inspection. If something in the field makes the specified assembly difficult to build, we raise it with you and the design team instead of improvising.
Will you coordinate directly with our general contractor and other trades?
Yes. Most of our commercial work comes through general contractors, and we are used to working within an existing construction schedule alongside MEP trades, framers, ceiling grid installers, and inspectors. We attend coordination meetings where required, give notice when we need a wall released, and flag anything that would hold up another trade. You should not have to chase us for a status update or manage our crew day to day.
How do you handle dust and disruption in an occupied building?
Containment is planned before mobilization, not improvised once the noise starts. We seal the work area with temporary barriers and run negative air where required to keep dust out of shared HVAC systems and neighboring tenancies, and we protect shared corridors, elevators, and finished flooring along the route. The area is cleaned daily rather than at the end of the week, and egress routes stay clear at all times. For particularly sensitive environments such as medical or food service tenancies, we discuss extra measures during the site walk.
Can you price from our construction drawings without a site visit?
We can produce a preliminary number from a complete drawing set, wall schedule, and specifications, and that is often enough for early budgeting. For a firm quote we prefer to walk the site, because existing conditions in commercial buildings frequently differ from what is documented, particularly in older properties that have been reconfigured over the years. Access, structural attachment points, and ceiling conditions are the usual surprises. Send the documents through and we will tell you what we can confirm on paper and what needs eyes on site.
Do you handle partitions that run full height to the structural deck?
Yes. Deck-height partitions are common in commercial work for acoustic separation, fire rating, and security, and they involve more than just longer board. The head of the wall needs a deflection detail so building movement does not crack the drywall, bracing requirements change, and the work above the ceiling line has to be sequenced around ductwork, sprinkler lines, and cable trays. We build these to the detail shown on the drawings and coordinate the sequence with the trades working above the grid.
What Does My Drywall Project Cost?
Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Mount Dora, and a calculator built on the same numbers.
Drywall Repair & Patch
Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Mount Dora — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a cut-out ceiling section replaced and texture-matched (an 8×10 section ran $720 flat), long seam cracks (46 linear feet of re-taped seams across three rooms ran $540 flat), and popcorn removal finished smooth (230 sq ft ran $575 flat).
New Drywall Installation
For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.00 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,670 around Mount Dora.
Room Remodel & Replacement
Tearing out old drywall and hauling it off adds $0.60–$1.25 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,330. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.
Garage Drywall
Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.
Texture, Skim & Paint
On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.85. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,960 for texture and paint together.
What Moves the Price
Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
Tear-out. Removing old drywall and disposing of it is its own line on the quote.
Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.
A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.
Estimate Your Project
Measure the damaged section itself — length × width. A full 4×8 sheet section is 32 sq ft.
Spots done in one visit share a single minimum charge.
Price includes tearing out the old drywall and hauling it off.
Includes 5/8″ Type X fire-rated board on the wall shared with the house — and on the ceiling when there is living space above it — as code requires.
Your estimated range
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to Mount Dora Drywall Pros
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the house. Prefer to talk? Call (352) 623-5928.
That is where most of our attention goes. We work to the drawings and the wall schedule rather than assuming every partition is the same, and we keep fire-rated and acoustic assemblies built exactly as specified so they hold up at inspection.
We sequence our work so mechanical, electrical, and plumbing trades can close out on time. Commercial sites also come with rules a house never has, including building hours, loading dock access, elevator bookings, and neighboring tenants who are still open for business.
We plan around all of it before mobilizing. If you are a general contractor pricing a package, a property owner preparing a space for lease, or a business owner building out a new location, request a quote. We will review the drawings with you.
Get a FREE Quote.
Why General Contractors and Property Owners Work With Us
Mount Dora Drywall Pros is set up to be a reliable subcontractor. On a commercial job, that means showing up when the schedule says so and leaving the space ready for the next trade. We price from the documents and flag discrepancies between the plans and what is actually on site before they become change orders.
We keep the wall schedule in front of the crew so a rated partition does not get built as a standard one when something in the field does not match the drawings.
You hear about it that day.
We also take the site conditions seriously. That means containment and negative air where the building is occupied, work performed within the hours the property allows, protection for finished floors and elevator cabs, and debris removed to the designated point rather than stacked in a corridor. Our crews carry the documentation a GC needs for closeout and we are comfortable working alongside MEP trades, ceiling grid installers, and inspectors without needing to be managed. Check availability early in your project timeline and we will tell you honestly whether we can hold your dates. When an occupied space needs damaged walls fixed rather than new partitions, we also handle Commercial Drywall Repair.
Our Commercial Drywall Installation Services
Commercial work covers a wide range of building types and wall assemblies, and each one has its own requirements around framing, board specification, and inspection. The services below reflect the commercial installations we handle most often around Mount Dora, from bare shell interiors through to occupied buildings being reconfigured floor by floor.
Tenant Improvement Build-Outs
Installing new partitions and ceilings inside leased spaces, working to the tenant drawings and the landlord's building requirements.
Shell and Core Interior Buildouts
Boarding out bare commercial shells, including demising walls, corridors, restrooms, and back-of-house areas.
Office and Retail Partition Walls
Framing and boarding interior partitions for offices, suites, storefronts, and display walls to the heights shown on the plans.
Installing board in warehouses, workshops, and industrial units where wall heights and lift access drive the approach.
Multi-Unit and Corridor Installation
Repeat-layout drywall for apartment blocks, medical suites, and multi-tenant buildings where consistency across units matters.
Planning a Commercial Install Around Your Building and Schedule
The building itself sets most of the constraints on a commercial job. Loading areas, service entries, freight elevators, and corridor widths determine how material gets in and whether twelve-foot board is even an option on an upper floor. Properties with basement parking, shared loading bays, or a single service door often need deliveries scheduled outside trading hours, and that has to be agreed with the property manager before the order is placed. Active neighboring tenancies add another layer, since noise from framing and screw guns travels through a demising wall far more than most people expect. We confirm permitted working hours, dust and noise requirements, and access arrangements during the site walk rather than discovering them on day one.
Coordination with other trades is the second half of the plan. In-wall mechanical, electrical, plumbing, data, and fire suppression, and blocking for wall-mounted gear, all need to be complete and inspected where required before we close a wall. On rated assemblies, penetrations need proper firestopping. Any inspection of the assembly has to happen before the second side goes on. The sequence is not negotiable. We also coordinate with the ceiling grid installer so partition heights and bracing suit whatever ceiling system is going in. Holding the building conditioned during finishing matters in Florida too, because high humidity slows joint compound and can push a closeout date.
Commercial Property and Building Conditions in Mount Dora
Commercial space around Mount Dora is a mix, and the building type usually tells you what to expect behind the walls. The downtown area holds older buildings with masonry structures, uneven existing walls, and floor plans that have been divided and redivided over the years, which often means furring, shimming, and careful measurement before anything gets framed. Along the wider commercial corridors and newer developments you find purpose-built retail, office suites, and light industrial units with steel structures, concrete tilt-up walls, and open bays that are much more straightforward to lay out but need proper attention to attachment and deflection at the head of the wall.
The local climate affects commercial work in ways that matter to a schedule. Warehouses, workshops, and unconditioned tenancies get seriously hot through the long summer, which slows crews and affects how joint compound cures on high walls. Buildings with large roof spans and metal structures move with temperature, so control and deflection details at the top of partitions are not optional if you want walls that stay crack-free. Loading areas and service corridors in older properties are often tight, and afternoon storms through the wet season can disrupt a delivery window, so we build a buffer into material scheduling rather than assuming a perfect day.
What Affects the Cost of a Commercial Drywall Package
On commercial work, cost tracks the wall schedule more than the floor plan. A job with several different rated and acoustic assemblies costs more per linear foot than one built entirely from standard partitions, because those assemblies need specific board types, layered construction, insulation, and sealant details, and they take longer to build correctly. Wall height is the next big factor. Partitions running to deck rather than stopping at the ceiling grid use significantly more material and require bracing, and anything above standard height brings lifts, staging, and extra labor into the equation.
Beyond the assemblies, the variables are site-driven. Buildings where material must be moved through a single service entry, a freight elevator, or long corridors carry more labor than an open ground-floor shell. Work restricted to nights or weekends to protect trading hours costs more than standard-hours work. Occupied buildings require containment, negative air, and daily cleanup that an empty shell does not. Finish level, the number of openings and corners, coordination with MEP sequencing, and how debris must be removed from the property all feed into the price. We price from the drawings and a site walk, so request a quote with your documents attached and you will get a scope you can compare properly.
How a Commercial Installation Runs From Drawings to Handover
Step 1: Document Review and Site Walk
We review the plans, wall schedule, and specifications, then walk the building to check existing conditions, access routes, and anything on site that does not match the drawings. Discrepancies get raised before pricing, not after.
Step 2: Scope, Pricing, and Schedule Confirmation
You receive a written scope covering assemblies, board types, heights, finish level, containment, waste handling, and the dates we can hold. Building hours and access restrictions are built into the program from the start.
Step 3: Pre-Installation Coordination
Before mobilizing we confirm that framing, in-wall MEP, blocking, and insulation are complete, that required rough-in inspections are signed off, and that delivery and elevator access are booked with the property manager.
Step 4: Site Protection and Material Staging
Board is delivered and staged close to the work area without blocking egress routes. Floors, elevators, and shared corridors are protected, and containment with negative air goes up where the building is occupied.
Step 5: Partition and Ceiling Board Installation
Board is installed to the wall schedule, with rated and acoustic assemblies built exactly as listed. Fasteners follow the specified pattern and partitions are braced and detailed correctly at the head of the wall.
Step 6: Firestopping, Sealant, and Inspection Support
Penetrations are firestopped and acoustic sealant applied where the assembly calls for it. We stage the work so inspections of rated assemblies can happen before the second side is closed, and we are on site to support them.
Step 7: Finishing, Cleanup, and Trade Handover
We finish to the specified level or hand over for the finishing contractor, remove debris to the designated point, and leave the space ready for the next trade. A final walk with the project manager closes out our scope.
Get a Clear Quote on Your Project
The next step is a straight conversation about the space itself. Tell us what you are dealing with, send through photos or plans if you have them, and we will let you know what the work involves, how long it should take, and what it will cost. There is no obligation attached to an estimate, and we would rather spend the time getting the scope right than hand you a number that changes halfway through the job.
Mount Dora Drywall Pros works with homeowners, builders, property managers, and business owners across Mount Dora and the surrounding Lake County area. Request a quote or check availability. You will get a clear answer on timing rather than a vague callback promise. If your schedule is tight or you are coordinating around other trades, tell us upfront. We will plan the work around it.
Recent Project in Mount Dora, FL
Drywall finishing for a room addition in Tavares, FL
Homeowner: June — Tavares, FL
The problem: The addition had bare hung board with open seams. It could not be painted or used until it was finished.
What June told us: June had waited months on the build. She wanted the room done so her mother could move in.
Scope of work: Taped, mudded, and finished new board in a home addition — three coats, sanded smooth, ready for primer and paint.
Materials and gear: Paper tape, joint compound in three coats, corner bead. Size: 600 sq ft of board.
Final price: $1,800, with 4 days on site.
Cost note: About $3.00 per sq ft for finish work on new board, inside the Level 5 install band of $1.85 to $3.40 per sq ft.
Outcome: The room finished smooth and clean. June's mother moved in the next month.