Frequently Asked Questions — Mount Dora Drywall Pros

Short, plain answers about drywall in Mount Dora, FL. For a firm price on your job, ask for a free written estimate.

📞 Talk to a Drywall Specialist: (352) 623-5928

Frequently Asked Questions

How much does drywall repair cost?

Small patches start at the $250 minimum, and the repair floor runs $250 to $375. Typical single repairs run $250 to $800, and a ceiling repair falls in that same $250 to $800 range. New board, hung and finished, runs $1.45 to $2.60 per square foot at Level 3, $1.60 to $3.00 at Level 4, and $1.85 to $3.40 at Level 5. We look at the job and give you a firm price in writing before we start.

How long does a drywall job take?

A patch takes a few hours to one day. A room takes 1 to 2 days. A full home takes 3 to 5 days. Compound must dry between coats. Most jobs span more than one visit.

Can you match my wall texture?

Yes. We match orange peel, knockdown, and smooth finishes. We test the match on a small spot first. On most walls, the repair blends in once it is painted.

Do you fix water-damaged drywall?

Yes. First the leak must be fixed and the wall must be dry. Then we cut out the soft board, check for mold, and fit new board. Wet board that stays in place will keep causing harm.

Will the work make a mess?

We mask floors and vents. We use dust control when we sand. We haul out the old board and scraps. Your home should be clean when we leave.

Do you paint after the repair?

We leave repairs sanded and ready for paint, and if you want the spot painted to match, ask when you book. Many owners paint the full wall for the best match.

What Does My Drywall Project Cost?

Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Mount Dora, and a calculator built on the same numbers.

Drywall Repair & Patch

Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Mount Dora — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a cut-out ceiling section replaced and texture-matched (an 8×10 section ran $720 flat), long seam cracks (46 linear feet of re-taped seams across three rooms ran $540 flat), and popcorn removal finished smooth (230 sq ft ran $575 flat).

New Drywall Installation

For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.00 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,670 around Mount Dora.

Room Remodel & Replacement

Tearing out old drywall and hauling it off adds $0.60–$1.25 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,330. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.

Garage Drywall

Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.

Texture, Skim & Paint

On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.85. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,960 for texture and paint together.

What Moves the Price

  • Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
  • Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
  • Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
  • Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
  • Tear-out. Removing old drywall and disposing of it is its own line on the quote.
  • Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.

Estimate Your Project

1 · Pick your project
Your estimated range

Free — no obligation. Your calculator numbers ride along with the request.

Still have a question?

Send the form on this page or use the contact page. We answer in plain words, with no pressure.

Prefer to talk? Call (352) 623-5928.

Get a free written estimate

📞 (352) 623-5928