Drywall ceiling repair in Mount Dora, FL
Homeowner: Beth — Mount Dora, FL
The problem: A roof leak had stained the ceiling and the board sagged in one corner.
What Beth told us: Beth had the roof fixed first. Then she wanted the ceiling sound and clean before guests came for the holidays.
Scope of work: Cut out a water-stained section of ceiling board, fit new board, taped the seams, and matched the light knockdown texture.
Materials and gear: Half-inch drywall board, joint compound, knockdown texture. Size: 80 sq ft (8 by 10 ft).
Final price: $720, with 1 day on site.
Cost note: Small ceiling repairs run higher per foot than full rooms because of setup, texture match, and dust control.
Outcome: The ceiling is flat and the stain is gone. Beth said guests never spot the repair.
Residential drywall repair in Eustis, FL
Homeowner: Ray — Eustis, FL
The problem: Hairline cracks ran along the ceiling seams in three rooms. They came back each time Ray painted over them.
What Ray told us: Ray wanted the cracks fixed for good, not just covered. He asked what kept them coming back.
Scope of work: Fixed cracked seams in three rooms — re-taped the joints, floated fresh compound, and sanded smooth for paint.
Materials and gear: Paper tape, setting compound, finish compound. Size: 3 rooms, about 46 linear ft of seams.
Final price: $540, with 1 day on site.
Cost note: Three rooms priced as one written job at $540, inside the $250 to $800 single-repair range.
Outcome: The seams are tight and smooth. A year on, Ray says the cracks have not come back.
Drywall finishing for a room addition in Tavares, FL
Homeowner: June — Tavares, FL
The problem: The addition had bare hung board with open seams. It could not be painted or used until it was finished.
What June told us: June had waited months on the build. She wanted the room done so her mother could move in.
Scope of work: Taped, mudded, and finished new board in a home addition — three coats, sanded smooth, ready for primer and paint.
Materials and gear: Paper tape, joint compound in three coats, corner bead. Size: 600 sq ft of board.
Final price: $1,800, with 4 days on site.
Cost note: About $3.00 per sq ft for finish work on new board, inside the Level 5 install band of $1.85 to $3.40 per sq ft.
Outcome: The room finished smooth and clean. June's mother moved in the next month.
Want results like these at your home? Ask for a free written estimate. You get the price before any work starts.
Prefer to talk? Call (352) 623-5928.