Drywall Services in Longwood, FL

Mount Dora Drywall Pros provides drywall installation and repair for homes and businesses across Longwood, the Seminole County city known for its 190-acre historic district and landmarks like the Bradlee-McIntyre House and Big Tree Park. Founded in the 1870s as a winter retreat for northern visitors, Longwood today mixes a well-preserved historic core with newer home neighborhoods spreading out from its original railroad-era center.

Longwood owners can request a quote for a repair, a renovation, or an installation — including careful work in and near the historic district — and every job comes with a clear, itemized quote before work begins, so scope, materials, and timeline hold no surprises.

Get a FREE Quote.

📞 Talk to a Drywall Specialist: (352) 623-5928

Frequently Asked Questions

How much does drywall repair cost?

Small patches start at the $250 minimum, and the repair floor runs $250 to $375. Typical single repairs run $250 to $800, and a ceiling repair falls in that same $250 to $800 range. New board, hung and finished, runs $1.45 to $2.60 per square foot at Level 3, $1.60 to $3.00 at Level 4, and $1.85 to $3.40 at Level 5. We look at the job and give you a firm price in writing before we start.

How long does a drywall job take?

A patch takes a few hours to one day. A room takes 1 to 2 days. A full home takes 3 to 5 days. Compound must dry between coats. Most jobs span more than one visit.

Can you match my wall texture?

Yes. We match orange peel, knockdown, and smooth finishes. We test the match on a small spot first. On most walls, the repair blends in once it is painted.

Do you fix water-damaged drywall?

Yes. First the leak must be fixed and the wall must be dry. Then we cut out the soft board, check for mold, and fit new board. Wet board that stays in place will keep causing harm.

Will the work make a mess?

We mask floors and vents. We use dust control when we sand. We haul out the old board and scraps. Your home should be clean when we leave.

Do you paint after the repair?

We leave repairs sanded and ready for paint, and if you want the spot painted to match, ask when you book. Many owners paint the full wall for the best match.

What Does My Drywall Project Cost?

Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Mount Dora, and a calculator built on the same numbers.

Drywall Repair & Patch

Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Mount Dora — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a cut-out ceiling section replaced and texture-matched (an 8×10 section ran $720 flat), long seam cracks (46 linear feet of re-taped seams across three rooms ran $540 flat), and popcorn removal finished smooth (230 sq ft ran $575 flat).

New Drywall Installation

For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.00 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,670 around Mount Dora.

Room Remodel & Replacement

Tearing out old drywall and hauling it off adds $0.60–$1.25 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,330. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.

Garage Drywall

Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.

Texture, Skim & Paint

On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.85. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,960 for texture and paint together.

What Moves the Price

  • Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
  • Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
  • Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
  • Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
  • Tear-out. Removing old drywall and disposing of it is its own line on the quote.
  • Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.

These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.

A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.

Estimate Your Project

1 · Pick your project
Your estimated range

Free — no obligation. Your calculator numbers ride along with the request.

Local Drywall Experts for Longwood's Historic and Modern Homes

Longwood's identity is built around its well-preserved historic district, and Mount Dora Drywall Pros brings the same care to a home near the Bradlee-McIntyre House as it does to a newer property elsewhere in the city. That range of construction eras means the crew adjusts its process based on what a specific wall assembly actually calls for, rather than a one-size approach.

Every estimate in Longwood is written and itemized before work begins, with clear communication about materials and timeline across the project. Mount Dora Drywall Pros stands behind its installation and finish quality on every job here, whether it is a single repaired wall near the Bradlee-McIntyre House or a full interior elsewhere in the city.

Gloved hand smoothing ceiling compound with trowel in Longwood

About Longwood: A Preserved Piece of Old Florida

Longwood was founded in the 1870s by Edward Warren Henck, who named the new town after a Boston suburb he had helped design, and the settlement grew quickly as a winter retreat for wealthy northerners after the South Florida Railroad arrived in 1880. That early prosperity left behind a concentration of well-preserved buildings, and today the Longwood Historic District, listed on the National Register of Historic Places since 1990, includes 37 contributing structures spread across roughly 190 acres near the intersection of State Road 434 and County Road 427. The centerpiece, the Bradlee-McIntyre House, is a Queen Anne-style Victorian cottage from 1885 that was relocated to the district in the 1970s as part of a broader local preservation effort.

Just outside the historic core, Big Tree Park is home to the site of "The Senator," a bald cypress tree believed to have stood for roughly 3,500 years before it was lost to fire in 2012, along with "Lady Liberty," another ancient cypress that still stands along the park's boardwalk trail through the Spring Hammock Preserve. Annual events like the Longwood Arts and Crafts Festival and Christmas in Olde Longwood continue to draw visitors to the historic district. The city's home areas beyond downtown have grown steadily since Longwood's early railroad days into a full mix of home styles and ages.

Property Considerations for Longwood's Historic District and Beyond

Homes and buildings within or near Longwood's historic district, some dating back well over a century, often have original wall assemblies that have been altered, repaired, or updated multiple times, and opening one of these walls can reveal older framing or finish work that calls for careful matching rather than a generic patch. These properties tend to be architecturally distinct, and preserving that character is often a priority for the owner. When original board has been altered too many times to hold a clean finish, drywall replacement is often the better route.

Newer residential neighborhoods elsewhere in Longwood present a more standard scope, most times involving straightforward framing and finish expectations that match surrounding modern construction. Mount Dora Drywall Pros evaluates each property individually, since a Victorian-era cottage and a newer subdivision home call for noticeably different approaches to a repair or installation.

Local Knowledge for Longwood Property Owners

Because Longwood takes real pride in its historic district, homeowners near the district often want repairs that respect the age and style of the home, and Mount Dora Drywall Pros discusses texture matching and finish approach upfront so the result doesn't stand out from the surrounding architecture. This is a different priority than a straightforward builder-grade repair in a newer neighborhood, and the crew treats each conversation accordingly.

Longwood's proximity to Spring Hammock Preserve and its wooded, low-lying terrain also means some properties near the preserve or other wetland areas deal with more humidity than homes on higher, more open ground, which is worth factoring into board selection for bathrooms and other moisture-prone rooms. Property owners planning renovations around the city's annual festivals in the historic district may also want to consider event schedules when planning downtown-adjacent work. We also serve neighboring Altamonte Springs.

How We Work

Step 1 — Initial Conversation and Site Details

A Longwood job starts with a conversation about the property and the scope of the drywall work, including concerns that come with the city's older housing, such as original wall assemblies in the historic district.

Step 2 — On-Site Assessment or Photo Review

Depending on the project, the crew reviews the space in person or through photos and measurements provided by the property owner, looking closely at framing that may predate modern standards.

Step 3 — Written Quote

A clear, itemized quote is provided covering materials, labor, and an estimated timeline for your Longwood project, so you know what to expect before committing to the work.

Step 4 — Scheduling

Once the quote is approved, the job is scheduled around the property owner's timeline, with consideration given to occupied spaces, active businesses, and the care a historic property requires.

Step 5 — Installation or Repair

In a Longwood home, the crew hangs the board, tapes and muds the seams, and sands everything paint-ready, taking special care around fixtures, trim, and the period woodwork in the city's older homes.

Step 6 — Final Walkthrough

Closure means walking the finished surfaces with you at the property, confirming they meet expectations, and leaving the space clean for its next step, such as painting.

Ready to Start Your Drywall Project?

Request a quote or check availability for an upcoming drywall installation or repair project in Longwood — clear, itemized estimates and straightforward scheduling for home and commercial properties, with no pressure and no guesswork about scope or cost before the work begins.

How a job runs in Longwood

For a Longwood home, the first visit is about the house itself: its age, its existing wall assemblies, and the finish you want matched. You get that scope as a firm written price, the crew works carefully around period trim and finished rooms, and you review the completed surfaces with us before paying.

Projects completed in Longwood

Drywall finishing in Longwood, FL

Homeowner: Lena — Longwood, FL

The problem: Lena's Longwood project stood at bare board — 500 square feet of it — with seams untaped and corners unbeaded.

What Lena told us: Lena wanted the full finish carried through properly: three coats, crisp corners, and a surface that would not show seams after painting.

Scope of work: The crew taped the seams with paper tape, ran corner bead on the outside corners, and built the finish up in three coats of compound with sanding between passes.

Materials and gear: Paper tape, corner bead, and joint compound applied in three coats across the 500 square feet.

The finishing job totaled $1,450.

Cost note: Lena's price works out to $2.90 per square foot, inside the Level 4 install band of $1.60 to $3.00 per square foot.

Outcome: Lena's walls finished smooth and even, ready for primer and paint with no seam lines showing.

📞 (352) 623-5928