Mount Dora Drywall Pros does drywall installation and repair across Altamonte Springs. Altamonte Springs is a Seminole County city. It is built around Cranes Roost Park. It has the mixed-use Uptown Altamonte district. The city has suburban single-family neighborhoods. It has dense condos and apartments near the city center. It has a major shopping corridor at Altamonte Mall. Few cities this size have such a wide mix of property types.
Altamonte Springs owners can ask for a quote on a home repair or a full renovation, and businesses along the city's main corridors can check our availability for tenant build-outs near Uptown Altamonte and beyond. Every job starts with a clear, itemized estimate, so the scope, the materials, and the timeline are settled before work begins.
Small patches start at the $250 minimum, and the repair floor runs $250 to $375. Typical single repairs run $250 to $800, and a ceiling repair falls in that same $250 to $800 range. New board, hung and finished, runs $1.45 to $2.60 per square foot at Level 3, $1.60 to $3.00 at Level 4, and $1.85 to $3.40 at Level 5. We look at the job and give you a firm price in writing before we start.
How long does a drywall job take?
A patch takes a few hours to one day. A room takes 1 to 2 days. A full home takes 3 to 5 days. Compound must dry between coats. Most jobs span more than one visit.
Can you match my wall texture?
Yes. We match orange peel, knockdown, and smooth finishes. We test the match on a small spot first. On most walls, the repair blends in once it is painted.
Do you fix water-damaged drywall?
Yes. First the leak must be fixed and the wall must be dry. Then we cut out the soft board, check for mold, and fit new board. Wet board that stays in place will keep causing harm.
Will the work make a mess?
We mask floors and vents. We use dust control when we sand. We haul out the old board and scraps. Your home should be clean when we leave.
Do you paint after the repair?
We leave repairs sanded and ready for paint, and if you want the spot painted to match, ask when you book. Many owners paint the full wall for the best match.
What Does My Drywall Project Cost?
Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Mount Dora, and a calculator built on the same numbers.
Drywall Repair & Patch
Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Mount Dora — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a cut-out ceiling section replaced and texture-matched (an 8×10 section ran $720 flat), long seam cracks (46 linear feet of re-taped seams across three rooms ran $540 flat), and popcorn removal finished smooth (230 sq ft ran $575 flat).
New Drywall Installation
For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.00 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,670 around Mount Dora.
Room Remodel & Replacement
Tearing out old drywall and hauling it off adds $0.60–$1.25 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,330. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.
Garage Drywall
Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.
Texture, Skim & Paint
On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.85. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,960 for texture and paint together.
What Moves the Price
Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
Tear-out. Removing old drywall and disposing of it is its own line on the quote.
Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.
A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.
Estimate Your Project
Measure the damaged section itself — length × width. A full 4×8 sheet section is 32 sq ft.
Spots done in one visit share a single minimum charge.
Price includes tearing out the old drywall and hauling it off.
Includes 5/8″ Type X fire-rated board on the wall shared with the house — and on the ceiling when there is living space above it — as code requires.
Your estimated range
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to Mount Dora Drywall Pros
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the house. Prefer to talk? Call (352) 623-5928.
Skilled Drywall Contractors for a Growing Urban Suburb
Altamonte Springs has grown a lot. It was a 1950s resort town. Now it has a dense, mixed-use city center. Older suburban neighborhoods surround it. Mount Dora Drywall Pros can handle both kinds of work. The crew is at ease in a condo or apartment building near Uptown Altamonte. They are also at ease in a single-family home farther from the interstate.
In Altamonte Springs, every project gets its quote in writing first — materials, labor, and timeline on one itemized page, in your hands before anything starts. We talk with you directly through the job, and Mount Dora Drywall Pros stands behind its hanging, taping, and finish work in a single-room repair just as much as in a full commercial interior.
About Altamonte Springs: From Resort Town to Uptown Hub
Altamonte Springs has long been a place people visit. In the early twentieth century, a resort hotel drew guests here. The hotel burned down in the 1950s. After that, the city had no true center for decades. Interstate 4 came in the 1960s. Growth sped up. Altamonte Mall opened in 1974. The city became a major shopping spot for northern Central Florida. In the 1980s, the city changed Cranes Roost. It was a low, flood-prone wetland. The city made it a 45-acre lakefront park. The park has a choreographed fountain. It has a floating amphitheater. It has a mile-long boardwalk. At last, Altamonte Springs had the civic centerpiece it had missed.
That project set the stage for Uptown Altamonte. Uptown is a mixed-use district. It launched in the early 2000s. It added walkable shops and dining. It added homes around Cranes Roost Park. The city is home to big employers. One is AdventHealth's headquarters. The city connects to the SunRail commuter rail system. It has lakes for recreation too. Lake Orienta and Lake Brantley sit by the urban core. Dense mixed-use areas mix with suburban neighborhoods. So Altamonte Springs has a wide mix of property types for a city its size.
Property Considerations for Altamonte Springs' Mixed Property Types
Condos and apartment buildings near Uptown Altamonte and Cranes Roost Park take extra planning. They have shared walls and common corridors, and they need coordination with building management, which affects scheduling and access for a drywall project. These properties need closer coordination than a standalone home. In multi-unit buildings, we also install fire-rated drywall. We use it where the building's wall assemblies call for it.
Single-family homes in the older suburban neighborhoods are a more standard scope. The details depend on the age of the home. They depend on how close it sits to lakes like Lake Orienta or Lake Brantley. Humidity can be a factor there. Commercial spaces near Altamonte Mall and the city's other retail corridors are a third group. They often have larger interior spans. Their finish schedules tie to a tenant's opening date. Mount Dora Drywall Pros plans for these differences in every quote.
Local Knowledge for Altamonte Springs Property Owners
Altamonte Springs has a mix of property types. There are standalone homes. There are condos and apartments. There is commercial space. So the logistics change from job to job. One job needs HOA approval. One needs building management approval. One needs a simple talk with the homeowner. Mount Dora Drywall Pros goes over these details at the start of every project.
The city sits close to Lake Orienta and Lake Brantley. Other water is near too. So humidity matters when we pick board. It matters for bathrooms, laundry rooms, or other moisture-prone spaces. This is key in older homes with no updated ventilation. Are you near Uptown Altamonte? Do you plan a renovation around a big event at Cranes Roost Park? One event is the annual Fourth of July fireworks display. If so, factor the event schedule into your project timing. We also serve neighboring Longwood.
How We Work
Step 1 — Initial Conversation and Site Details
It starts with a talk about your Altamonte Springs property — the drywall work you need and any concerns riding along with it, whether that is an older wall in a suburban neighborhood or a damp spot in a condo near Cranes Roost Park.
Step 2 — On-Site Assessment or Photo Review
The crew then looks at the space, in person for most Altamonte jobs or from photos and measurements you send, which shows us the framing, the access through your building, and the finish the job calls for.
Step 3 — Written Quote
You get a clear quote in writing that lists materials, labor, and a timeline, so you know exactly what to expect before you say yes to the work.
Step 4 — Scheduling
Once you approve the quote, we set the schedule around your timeline and plan for the realities of your building — people in the space, an open business next door, or other work going on at the site.
Step 5 — Installation or Repair
The crew hangs the drywall, then tapes, muds, and sands it to a smooth, paint-ready finish, taking care around fixtures and trim and protecting the rooms next to the work area.
Step 6 — Final Walkthrough
Before we call the job done, we walk the work with you in the room, check that it looks the way you expected, and leave the space clean and ready for its next step, like paint.
Ready to Start Your Drywall Project?
Request a quote for your Altamonte Springs drywall job, or check our availability for a repair — estimates here are clear and itemized, scheduling is simple for homes and businesses alike, and there is no pressure and no guesswork about scope or cost before we start.
Walls first in Altamonte Springs
Homes in Altamonte Springs sit near the lakes and roads of Seminole County, and walls here take a beating from sun, storm leaks, and settling. We fix the cause first, then the board — a patch that skips the cause will crack or stain again.
Projects completed in Altamonte Springs
Drywall patching in Altamonte Springs, FL
Homeowner: Alan — Altamonte Springs, FL
The problem: Two damaged spots in Alan's Altamonte Springs home — about 9 square feet of board between them — needed more than a smear of filler to disappear.
What Alan told us: Alan wanted both spots gone for good, with the texture matched so the patches would not show under paint.
Scope of work: The crew cut back each damaged spot, set the patches with mesh tape and joint compound, and feathered the compound wide so the edges would not telegraph through the finish.
Materials and gear: Joint compound, mesh tape, and texture spray, with the floors masked before work started and the room cleaned up as the job wrapped.
Final price: $285. Time on site: 2 days with dry time.
Cost note: Two patches handled in one visit at the repair minimum — $285 sits inside the $250 to $375 repair floor band.
Outcome: Both patches took the texture match cleanly, and Alan's final bill matched the written quote to the dollar.