Soundproofing a Home Office in Mount Dora, FL: Drywall, Insulation, and Quiet Walls
October 20, 2026
The work-from-home shuffle has a sound: a video call in the spare bedroom, a television in the living room, a dog announcing the mail at the front door of a Mount Dora house that was framed for none of it. Interior walls in most Florida homes are hollow — two sheets of half-inch board over studs, nothing between — and they stop about as much sound as a curtain with confidence.
The good news is that a wall can be made genuinely quiet without tearing the house apart, if you stack the right layers in the right order. This is the same build we spec on soundproof and acoustic drywall jobs, scaled for one office wall or two.
📞 Talk to a Drywall Specialist: (352) 623-5928Frequently Asked Questions
How much does drywall repair cost?
Small patches start at the $250 minimum, and the repair floor runs $250 to $375. Typical single repairs run $250 to $800, and a ceiling repair falls in that same $250 to $800 range. New board, hung and finished, runs $1.45 to $2.60 per square foot at Level 3, $1.60 to $3.00 at Level 4, and $1.85 to $3.40 at Level 5. We look at the job and give you a firm price in writing before we start.
How long does a drywall job take?
A patch takes a few hours to one day. A room takes 1 to 2 days. A full home takes 3 to 5 days. Compound must dry between coats. Most jobs span more than one visit.
Can you match my wall texture?
Yes. We match orange peel, knockdown, and smooth finishes. We test the match on a small spot first. On most walls, the repair blends in once it is painted.
Do you fix water-damaged drywall?
Yes. First the leak must be fixed and the wall must be dry. Then we cut out the soft board, check for mold, and fit new board. Wet board that stays in place will keep causing harm.
Will the work make a mess?
We mask floors and vents. We use dust control when we sand. We haul out the old board and scraps. Your home should be clean when we leave.
Do you paint after the repair?
We leave repairs sanded and ready for paint, and if you want the spot painted to match, ask when you book. Many owners paint the full wall for the best match.
What Does My Drywall Project Cost?
Drywall is priced by the square foot of wall and ceiling surface — not by the size of your floor. That one fact explains most of the gap between quotes. Here are the ranges we see on real jobs around Mount Dora, and a calculator built on the same numbers.
Drywall Repair & Patch
Most single repairs land between $250 and $800. Pros price patches by the square foot of damaged area — roughly $55–$75 a foot around Mount Dora — but every repair carries a minimum job charge, because a patch takes the same setup and the same repeat trips for drying coats whether it's the size of a dinner plate or a door. Grouping several spots into one visit is the cheapest way to fix them: they share one minimum. Some repairs are priced flat by the job instead of the square foot: a cut-out ceiling section replaced and texture-matched (an 8×10 section ran $720 flat), long seam cracks (46 linear feet of re-taped seams across three rooms ran $540 flat), and popcorn removal finished smooth (230 sq ft ran $575 flat).
New Drywall Installation
For bare studs finished paint-ready (a standard Level 4 finish), plan on $1.60–$3.00 per sq ft of wall and ceiling surface, materials and labor included. A typical 12×12 bedroom with 8-foot ceilings — that's 528 sq ft of surface — runs about $890–$1,670 around Mount Dora.
Room Remodel & Replacement
Tearing out old drywall and hauling it off adds $0.60–$1.25 per sq ft on top of new installation — a combined $2.20–$4.25 per sq ft. That same 12×12 bedroom, gutted and re-drywalled, runs about $1,210–$2,330. Opening walls can uncover surprises — water damage, old wiring — and those get priced once they're visible, never guessed at in advance.
Garage Drywall
Garages run $1.55–$3.30 per sq ft depending on finish. Code requires 5/8-inch fire-rated (Type X) board on the wall shared with the house, and on the ceiling when there's living space above it — that's the fire separation, not an upsell. Most two-car garages land between $1,900 and $4,100 finished.
Texture, Skim & Paint
On walls that are already up: skim coating runs $0.95–$1.30 per sq ft, orange-peel or knockdown texture $0.80–$1.85, and primer plus two coats of paint $1.05–$2.85. A typical room's walls — about 415 sq ft of surface — usually land between $770 and $1,960 for texture and paint together.
What Moves the Price
- Finish level. A full Level 5 skim coat (for gloss paint or bright, raking light) costs more than standard paint-ready Level 4.
- Ceilings. Overhead work runs roughly 20–25% more than the same area on a wall — lifts, heavier board, two sets of hands.
- Ceiling height. Taller walls mean longer sheets, scaffolding, and slower work.
- Texture matching. Blending a patch into existing orange peel or knockdown is hand work, and it's priced like it.
- Tear-out. Removing old drywall and disposing of it is its own line on the quote.
- Job size. Small jobs carry a minimum charge; on big jobs the setup spreads over more feet, so the per-foot price drops.
These are planning ranges, not a quote — your final price is confirmed after an in-person look, before any work starts.
A note on materials. These ranges are figured with standard drywall board and the finish level you pick above. Board isn't all the same price, though: moisture- and mold-resistant board — the green or purple board for bathrooms and basements — costs more a sheet than standard board, and on a big job that can push you toward the top of your range, or a little past it. Tell us where the work is and we'll confirm the exact board and the price at the in-person estimate, before any work starts.
Estimate Your Project
Measure the damaged section itself — length × width. A full 4×8 sheet section is 32 sq ft.
Spots done in one visit share a single minimum charge.
Price includes tearing out the old drywall and hauling it off.
Includes 5/8″ Type X fire-rated board on the wall shared with the house — and on the ceiling when there is living space above it — as code requires.
Free — no obligation. Your calculator numbers ride along with the request.
Send Your Project to Mount Dora Drywall Pros
Your estimate is attached automatically. Add your info and — if you can — a few photos of the project. Photos help us price the job before we ever set foot in the house. Prefer to talk? Call (352) 623-5928.
What is the best drywall for soundproofing a home office?
Mass is what stops sound, and the standard upgrade is five-eighths-inch board — ideally a sound-damping panel, which sandwiches a viscoelastic layer between two gypsum cores and turns sound energy into a trace of heat. Two layers of ordinary five-eighths board with damping compound between them gets you most of the same result for less money. What does not work is a single layer of thicker board alone and nothing else: it helps, a little, and disappoints people who expected silence.
The second layer matters more than the brand of the first. Doubling the board on one side of the office wall, with seams staggered so they never line up with the layer beneath, is where the big gains live. Keep the existing wall if it is sound — building over it is faster, cheaper, and adds the mass where it counts.
Does insulation in walls help with sound?
Yes, but understand its job. The hollow cavity between studs works like a drum, and filling it with mineral wool or ordinary fiberglass batts calms that drum — it absorbs the sound that gets into the wall rather than blocking sound outright. On its own, insulation in an otherwise unchanged wall buys a modest improvement you can hear. Combined with added mass on the surface, it is part of how a wall climbs from conversation-carrying to conversation-hiding.
If the wall is staying closed, insulation can still be added by dense-packing through small holes that get patched after — a reasonable step when the office shares a wall with a living room and the drywall is otherwise good.
What STC rating do I need for a home office wall?
STC — Sound Transmission Class — is the single number labs give a wall assembly. A hollow interior wall rates around STC 33: loud speech is understood through it. At STC 45, loud speech becomes a murmur you cannot follow. At STC 50 and above, most speech disappears entirely, and that is the target for an office where calls are confidential or a baby sleeps on the other side. A doubled, damped, insulated wall lands in the high forties to low fifties — which is to say, it lands where you want it.
Then seal the leaks, because sound is water: it finds the gaps. The perimeter of the wall gets acoustic sealant, the electrical boxes on opposite sides get offset and puttied, and the door — usually the weakest part of the whole project — gets a solid core and seals. A fifty-rated wall with a hollow door and a one-inch gap under it performs like the door, not the wall.
What about the window side of the room? Sound leaks there too, but usually less than people fear: a single-pane window passes noise, yet the wall and door still dominate in most bedrooms-turned-offices. Treat the wall and door first, live with it a week, and only then price window inserts or heavier curtains if the street is genuinely loud. More than one office has been made perfectly workable with the wall alone, because the goal is not a recording studio — it is a call where the house disappears.
And a note on the ceiling: if the noise problem is a living room below or a teenager above, the wall work will not touch it. Sound through a floor is a different assembly — mass and decoupling on the ceiling below or a proper underlayment above — and it is worth naming which direction your noise travels before anyone quotes you a wall.
A sensible order for the project
- Decide the target: muffled television, or calls nobody can follow?
- Add mass first — a second layer of board with damping compound.
- Fill the cavity with insulation if the wall is open or can be dense-packed.
- Seal every edge, box, and penetration with acoustic sealant.
- Finish with the door: solid core, perimeter seals, a bottom sweep.
Working from a room that will not stay quiet? Call (352) 623-5928 — we will look at the wall you share, tell you which layers it needs and which it does not, and put the price in writing.